Guides
Selected filters
All guides
-
Anchors for building maintenance
This guide provides information about the safe use ofpost-installed anchors for fall arrest and industrial ropeaccess attachment points used for building maintenance,including both single anchor point and multi-fixing anchorpoints.
-
Safety Leadership Challenge: Supply chain briefing
Presentation
-
Working across borders - Grain augers
This industry safety standard covers the design and use of all new grain augers, including pencil, transportable and self-propelled grain augers.
-
Concrete Pumping Campaign 2009
Report of WHSQ enforcement issues for concrete pumping equipment and its safe operation in Queensland.
-
Working across borders - Post drivers
This industry safety standard covers all new power-driven post drivers, including those with integrated hydraulic earth auger systems driven by a tractor, or by other means.
-
Safe working at heights from work platforms in the meat industry
Control the risks from working on raised processing platforms at meat processing workplaces.
-
Concrete pumping - Clean out procedures
Cleaning out concrete pumping equipment can be a highly hazardous operation if correct safety procedures are not used.
-
High risk work licensing for lifts and escalators
Understand the high risk work licence (HRWL) requirements in the liftand escalator industry in Queensland.
-
Vehicles as a Workplace: Greyfleet
Greyfleet means any vehicle used for work-related purposes which is not directly provided for by the organisation that employs the driver.
-
Concrete pumping campaign audit checklist
An audit guide checklist for concrete pumps.
-
Transport and storage industry hotspots
The most common injuries to workers in the transport and storage industry based on accepted workers’ compensation claims (2010).