Safety tips when operating a quad bike.
Have your say on the Quad bikes and side-by-side vehicles safety—Proposed work health and safety regulation—Discussion paper.
Closes 5pm, Wednesday 31 August 2022.
Consumer Goods (Quad Bikes) Safety Standard 2019
The Australian Competition and Consumer Commission introduced the Consumer Goods (Quad Bikes) Safety Standard 2019 to reduce the risk of fatality and injury associated with the use of quad bikes, by improving information for consumers, as well as the design of quad bikes. Phase two of the safety standard commences 11 October 2021.
Quad bike operators should
- complete a quad bike training course
- never allow passengers on the quad bike unless it has been specifically designed to carry two people
- wear a helmet and other personal protective equipment (PPE) when practical to do so
- make sure all cargo is secured before riding
- undertake 'active riding' techniques
- carefully descend slopes by keeping the quad bike in low gear and allowing the motor compression to act as a brake
- operate the quad bike at a safe speed
- read and comply with manufacturer's advice in the owner's manual.
Quad bike operators should not
- overload the quad bike beyond manufacturer's specifications
- allow children under 16 years to ride adult-sized quad bikes
- carry passengers, unless the quad bike has additional seats and foot-pegs
- operate on unfamiliar terrain, rough terrain or steep slopes, especially when carrying cargo or towing
- exceed towing limits
- operate a quad bike while under the influence of drugs or alcohol
- operate a quad bike beyond their capabilities.
Fitting and using accessories
It is important to follow the manufacturer's instructions when fitting and using quad bike accessories, including:
- using only the mounting point or draw bar provided by the manufacturer. Incorrect attachment can increase instability and cause rollovers.
- not altering the height of the mounting point or increase the towing capacity which could affect braking, steering or suspension and increase the risk of rollover
- ensuring all guards are in place and the bike can be easily operated from the seated position
- applying the correct load ratings on the front and rear carrier racks to avoid decreasing stability.
Considerations prior to purchase
Operators should clearly understand the purpose for the quad bike prior to purchase, such as:
- intended use of quad bike (e.g. tasks to be undertaken, size of property, competency of the operator)
- whether other equipment can be used instead of a quad bike, i.e. side-by-side vehicle or small tractor
- likely terrain and ground conditions
- power and speed
- gear ratio
- centre of gravity
- drive mechanism
- after-market attachments and accessories to be used
- seat carrying capacity
- reverse gear.