Skip to content
Menu

Alerts

Filter by Alert type
Alert type
Filter by Industry
Industry
Selected filters

Showing 37-48 of 96 results with 1 filter

Choose a sort order
  • Incident alert

    Worker seriously injured by wood chipper disk

    In September 2021, a contractor suffered multiple fractures and a severe laceration while repairing a chipper disk weighing around two tonnes. For reasons yet to be established, the unrestrained chipper disc (part of a large wood chipping machine) has fallen from an upright position striking the contractor’s leg as it fell.

  • Incident alert

    Worker killed by piece of metal ejected from unguarded angle grinder

    In June 2021, a worker died from injuries sustained while he was using a 9-inch (230mm) angle grinder to cut the base of a structural steel member at a commercial construction site in Brisbane. It appears a small metal shard was violently ejected from the cutting work and struck his neck. No guarding was fitted to the angle grinder at the time.

  • Workplace health and safety alert

    Palfinger stabiliser locking system

    The purpose of this safety alert is to highlight the risk of unintentional extension of stabilisers on vehicle loading cranes (VLCs) and, in particular the operation of the stabiliser locking system on some models of Palfinger vehicle loading cranes (VLCs).

  • Workplace health and safety alert

    Diving tower edge protection

    This safety alert highlights the risk of falls from diving tower structures and provides guidance on risk controls. It applies to parts of diving towers where there is a risk of someone falling onto a solid structure below. It does not apply to parts of diving towers directly above water.

  • Workplace health and safety alert

    Failures of concrete pump delivery pipeline end fittings and hoses

    This safety alert highlights the risk of failure of concrete pump delivery lines including failures of end fittings.

  • Workplace health and safety alert

    Fake disposable respiratory protective equipment

    The purpose of this safety alert is to assist businesses in identifying fake (non-certified) respirators and highlight the risks associated with using them.

  • Incident alert

    Arc flash incidents

    In January 2021, two electrical workers suffered burns following an arc flash. They were working in a switch room with an LV main switchboard. Initial enquiries indicate electrical work was being done on the switchboard metering when the incident occurred.

  • Incident alert

    Tractor incidents

    In January 2021, a farmer died when the tractor he was operating struck a log and rolled. The farmer had been using the tractor to pull out a bogged car and do some spraying. He was thrown from the tractor when it rolled and was trapped underneath the rear mounted chemical tank.

  • Incident alert

    Worker killed in industrial shredding machine incident

    In January 2021, a worker was killed while operating an industrial shredding machine used to process bulk waste building materials.

  • Incident alert

    Person falls from tank

    In November 2020, a man sustained serious head injuries after falling from a water tank that had just been put in place by a vehicle loading crane. It appears he was standing on the tank close to the crane.

  • Incident alert

    Worker struck by moving truck

    In November 2020, a worker was seriously injured when he was run over by a truck while clearing debris caught underneath it.

  • Incident alert

    Workers caught in conveyor belt system

    In October 2020, a worker suffered serious arm injuries when he was caught in a conveyor belt system. In a separate incident, a young worker received significant degloving injuries to both hands after being pulled into a conveyor system.