Industry consultants for hazardous chemicals
Note: The following information is provided as a free service to industry. Workplace Health and Safety Queensland (WHSQ) does not endorse the companies/organisations listed below and provides no assurance as to the quality of the courses/services/goods listed. The list is not comprehensive—there are likely to be other businesses which offer relevant services/supplies but which are not listed here.
If you would like to have an entry for your business on this page, contact the HICB at firstname.lastname@example.org. You will need to provide a capability statement for work conducted in this area and outline relevant experience for consideration. Also include your preferred text for inclusion here if accepted.
On this page
- Storage and handling system consultants
- GHS classification, SDS and labelling consultants
GHS classification, SDS and labelling consultants
GHS classification, safety data sheet (SDS) and labelling consultants may be able to assist manufacturers and importers of hazardous chemicals with classification services, preparing compliant SDS and labelling containers in accordance with the globally harmonised system for the classification and labelling of chemicals (GHS). Hazardous chemicals are those chemicals that are classified as hazardous according to the GHS. A hazardous chemical must be correctly classified in accordance with GHS by the manufacturer or where imported, by the Australian importer. SDS must also be prepared for classified hazardous chemicals. Hazardous chemicals must also be correctly labelled in accordance with the GHS prior to being supplied to a workplace.
Storage and handling system consultants
Storage and handling system consultants may be able to assist a person conducting a business or undertaking (PCBU) by providing design, construction and commissioning services for new hazardous chemical storage and handling systems or compliance and auditing services for existing storage and handling systems (e.g. engineering advice and/or advice on compliance with Australian standards such as AS1940, AS1596, AS3780 etc.). These services may form part of an overall risk management strategy for a PCBU to safely manage hazardous chemical risks.
Note: Accredited auditors for electrical equipment in flammable hazardous areas
The Electrical Safety Regulation 2013 also includes requirements for connecting or reconnecting electrical installations/equipment in hazardous areas to a source of electricity, including the requirement for such an installation accredited by a hazardous area auditor. A list of these hazardous area auditors is maintained by the Electrical Safety Office.
ACOR is a multidiscipline engineering consultancy, with specialties in hazardous chemicals safety and environmental management. ACOR is committed to working collaboratively with our clients to ensure legislative compliance, the safety of personnel and protection of the environment through proven technical and risk assessment processes. Our national team consists of expert engineers, designers, consultants and auditors with a passion and a drive for delivering high quality solutions with integrity and accountability.
1300 4 HAZCHEM
Level 4, 43 Peel Street
South Brisbane QLD 4101
Phone: (07) 3844 5900
New South Wales:
Unit 10, Level 1, 1 Maitland Place
Baulkham Hills NSW 2153
Phone: (02) 9634 6311
Level 1, Unit 9, 19 Essex Street
Fremantle WA 6160
Phone: (08) 9336 3156
Afric-Aus Technical Solutions Pty Limited
With full time staff in Brisbane, Perth, Darwin, Canada, Middle East and Africa, we audit all HSE aspects of Major Hazard Facilities to identify safety gaps wherever they exist. We work with clients to promptly close these gaps before they result in accidents or incidences. Our key competitive edge is in our ability to deliver to ISO 55000 suit of standards. Afric-Aus Technical Solutions is the only company that delivers key HSE solutions to this standard in the current market both within and outside of Australia. We work based on models that have been successfully proven in other parts of the world and we deliver at industry-reasonable commercial rates.
Afric-Aus Technical Solutions Pty Limited
Regus Central Plaza
Level 21, 345 Queen Street
Brisbane Qld 4000
Phone: (07) 3012 6066 (office) | 0425 658 151(mobile)
Fax: (07) 3012 6001
Alba Management Pty Ltd
Alba Management Pty Ltd is a Queensland based organization that specializes in quality, health, safety and environmental management systems and Implementation.
Our personnel have exceptional work ethic and passion to drive and assist industry meet their objectives and legislative obligations. We have over 35 years high-risk industry experience namely, Oil & Gas, Petrochemical and Construction.
Alba Management can provide third party integrated QHSE audits, help you develop and implement your management systems. In addition, Alba Management can deliver QHSE training to support your organization, promote and improve behavioral safety, develop safety intervention processes and encourage health and well being.
All Modes Dangerous Goods Training (AMDG)
AMDG specialises in compliance training for the transport of dangerous goods by air, sea and road.
We conduct courses throughout Australia as scheduled courses or by arrangement onsite.
AMDG also provides consultancy and audit services on storage, placarding, SDS register, manifest quantity, major hazard facilities (MHF) threshold.
An Australian engineering consultancy offering clients a range of highly-developed, specialist skills in concept development, risk and safety engineering and management, numerical and scale modelling, oil spill response planning, naval architecture, structural and hydrodynamic engineering, subsea, coastal and offshore engineering, environmental assessment and modelling of environmental processes, and advanced analysis.
Provide independent advice and services to a diversity of clients in a range of sectors, including Oil and Gas, Petrochemical, Chemical process, Resources, Defence, Transport, Energy, Utility and Manufacturing. Clients include oil companies, mining companies, federal, state and local government, and major on-shore and off-shore construction companies.
AMOG Consulting (Melbourne Head Office)
Sea Technology House
19 Business Park Drive
Notting Hill, Victoria 3168
Phone: +61 3 9542 3700
Fax: +61 3 9542 3790
AMOG Consulting (Perth)
Level 3, 28 Kings Park Road
West Perth WA 6005
Phone: +61 8 9212 1800
Fax: +61 8 9212 1801
Australasian Convenience and Petroleum Marketers Association (ACAPMA)
ACAPMA is the national peak body representing the interests of the petroleum distribution and petroleum retail industry. The Association is first and foremost an employer organisation that is formally recognised under Australian law as the industrial advocate for fuel marketing and fuel distribution businesses in Australia. ACAPMA operates a National Petroleum Contractor Recognition Scheme (NPCRS) to assist industry.
The NPCRS is a voluntary industry contractor pre-qualification system that provides insurance and credit testing, commitment to standards and access to mandatory induction training and desktop or site based audits.
Australasian Institute of Dangerous Goods Consultants (AIDGC)
The Australasian Institute of Dangerous Goods Consultants (AIDGC) is an independent industry body that exists for the benefit of the dangerous goods industry, regulatory authorities, government, business and the general community. There are over 60 professional members who offer dangerous goods related services.
Our objective is to educate, promote, advise and consult on the safe storage and handling of dangerous goods. Since our establishment in 2001, we have built up a membership of consultants specialising in all classes of dangerous goods.
AIDGC member consultants have met entrance requirements that include formal competency assessment and satisfying the AIDGC Board of an appropriate background of competence in the storage, handling and use of those classes/divisions of dangerous goods which are listed in the membership register.
Whether for once-off advice or for ongoing projects, dangerous goods consultants can work with you to determine all the specific characteristics and requirements of your site, from storage and transport to staff training – everything you need to make your workplace compliant and safe.
They can also bring you up to date with all the relevant laws and practices and then keep you informed as things change.
AIDGC Associates are persons who demonstrate an interest in the aims of the AIDGC and in the storage, handling and use of selected classes/divisions of dangerous goods but who have not completed formal competency assessment to become full AIDGC members.
To find out more about the AIDGC, please visit https://aidgc.org.au/.
This free educational DVD explains the key issues for your business and where you can get the help you need. Order yours online now at https://aidgc.org.au/
Australian Chemical Services Pty Ltd
Australian Chemical Services (ACS) provides Regulatory Compliance, Technical & Quality Management consulting. With more than 20 years involvement in the specialty chemicals industry, ACS has a proven track record in many areas within the Specialty Chemicals Technical environment including:
Australian Institute of Occupational Hygienists (AIOH)
Australian Safety and Learning Systems (ASLS)
Two options are provided by ASLS to assist organisations to comply with legisation :
Phone: (07) 3285 8199
Australian Safety and Training Alliance (ASTA)
With full time staff operating in Bundaberg and Brisbane and certified consultants in Nambour, Maryborough, Hervey Bay, Gladstone and Mackay, ASTA can provide quality services and technical support to your business.
ASTA offers a range of services to help your organisation come to grips with all aspects of chemical management, no matter what stage your occupational health and safety program is at.
Bow-Tie Consulting – Safety and risk
Bow-Tie Consulting – Safety and riskBow-Tie Consulting provides cost-effective consequence and risk analysis. Our personnel are Registered Professional Engineers in Queensland and carry out both qualitative and quantitative studies to suit customer's specific needs.
We would be happy to provide you with a competitive quote.
Cadway Projects has over 20 years experience as fuel industry consultants. We specialise in the design and documentation of fuel facilities including service stations, highway travel centres, marina facilities, truck stops, fuel depots, industrial and workshop facilities.
Our client base includes a vast range of international fuel companies and smaller independent operators.
Business Development Manager
Phone: (07) 3257 2755
Fax: (07) 3257 2882
We are also listed with the Department of Public Works and have a PQC rating of 4.
Chemwatch is an Australian owned and operated chemicals management and GHS solutions specialist, with offices throughout the nation (including in Brisbane), and in a further 20 countries globally.
As one of the first 'GHS ready' providers, Chemwatch can assist you meet your regulatory requirements and has grown to be one of the largest and most trusted chemicals management software providers worldwide.
Chemwatch is a registered training organisation, offering certification in Chemicals Management Basics and Step-by-Step GHS eLearning modules covering basic to intermediate training in GHS.
For more information please visit http://www.chemwatch.net/
Melbourne Head Office
Phone: 03 9572 4700
Compliance Training and Engineering (CTE)
CTE are in the unique position where we can not only assess your workplace to relevant Legislation, Standards and Codes of Practice for the Storage and Handling of Dangerous Goods, but also provide Hazardous Area Classifications to provide a holistic assessment of your workplace. Your CTE consultant will hold the Australian accredited competencies in Classification & Design under the ASQA framework and hold international accreditation under the IECEx CoPC (Certificate of Personnel Competency) Scheme. CTE’s capabilities cover Classify, Design, Install, Test, Inspect, Audit & Maintaining of your Dangerous Goods/Hazardous Area/Electrical Installation.
CSM Safety Services Pty Ltd
CSM Safety Services Pty Ltd, providers of specialist services in the field of hazardous substances and dangerous goods management systems.
CSM Safety Services Pty Ltd can also provide training:
Dangerous Goods Equipment and Training Pty Ltd
Dangerous Goods Equipment and Training Pty Ltd (DGET) offers training, auditing and consultancy services.
DGET will work with you to obtain the best outcomes for your business in regards to licensing, storage, signage and training. Customised site specific training is available.
DGaS Services is a dangerous goods and hazardous materials specific consultancy providing services across Australia for small to large dangerous goods locations and major hazard facilities. Primarily based in Perth, and accessible across Queensland and the Northern Territory, DGaS Services work with customers that don’t change in decades and need verification audits, and others that diversify frequently to stay ahead. We are also very experienced in critical and reportable incident investigations, bespoke DG training for your site operations, and provision of EIP 1800 free call specialist advice for your transport fleet and contractors. Your change management is as important to us as your integrity and confidentiality.
DG Compliance Pty Ltd
DG Compliance (DGC) are experienced Dangerous Goods Consultants and fuel industry contractors, specialising in compliance of the storage and handling of flammable and combustible liquids and all dangerous goods, in accordance with the Work Health and Safety 2011 legislation and relevant Australian Standards.
DGC offers competitive administrative, engineering and maintenance solutions with prompt professional service extended to all dangerous goods locations including: public, private, corporate, commercial, industrial, local council / Government, mining, transport, marine and service industries
Should your business require experienced advice on any of the above particulars please don't hesitate to contact DG Compliance Pty Ltd with any inquiry or if we can be of assistance in relation to the above services.
DRA Safety Specialists Pty Ltd
DRA Safety Specialists operate from the Gold Coast and provide auditing, risk management and work health and safety consulting and training services across all states and territories of Australia. All consultants are degree qualified, registered Safety Professionals and certified auditors through RABQSA ensuring a high quality of advice.
Environmental Risk Solutions (ERS)
Environmental Risk Solutions Pty Ltd (ERS) is an Australian owned company which undertakes environmental, risk and safety assessment and training for a range of industries in accordance with relevant legislation.
ERM Risk is the risk management consultancy arm of Environmental Resources Management (ERM).
ERM Risk also offers other services relevant to the onshore and offshore industries, such as formal safety assessments, reliability, availability and maintainability studies and safety integrity level (SIL) assessments.
Field Enviro (Field Engineers Pty Ltd)
Environment, Health and Safety Consultants and Engineers – Field Enviro, a division of Field Engineers, is an environmental, health and safety consultancy has offices based in Mackay.
Mr David Corbett, Operations Manager
Unit 8, Site Business Park
38-42 Margaret Vella Drive
Paget Qld 4740
Phone: (07) 4952 1303
Mobile: 0457 855 751
Fax: (07) 4952 1306
Mr Jarrod Wilson, Principal HSE Advisor
Douglas Street Design Centre
Level 3, 5 Cribb Street
Milton QLD 4064
PO Box 5788, Mackay Mail Centre QLD 4741
Phone: 1300 854 782
Mobile: 0488 125 632
Fax: (07) 4952 1303
GHD is one of the world's leading engineering, architecture and environmental consulting companies. Wholly-owned by its people, GHD is dedicated to understanding and helping our clients achieve their goals in the global markets of water, energy and resources, environment, property and buildings, and transportation. Our network of 6000 professionals collaborate to improve the built, economic and social environment of the communities in which we operate.
Service Line Leader, Risk Management
Phone: (03) 8687 8000
Haz-Stor Australia Pty Ltd
Owner Manager Stevan Davidson MSIA.
Trading since 1998.
Member of Safety Institute of Australia Manufacturers of Dangerous Goods Storage exterior relocatables from 200L – 60,000L
Phone: (07) 3341 6200
Health and Safety Essentials Pty Ltd
HSE can provide you with essential consulting and training services in relation to the storage, handling, and use of hazardous chemicals (hazardous substances and dangerous goods). Specialising in the effective management of hazardous chemicals in the workplace.
All courses will be tailored to your needs by including chemicals, processes, policies, and procedures relevant to your organisation.
Icubed Consulting is a specialist consultancy with a focus on dangerous goods management, energy and the environment. Based in Queensland Icubed Consulting offer a range of services.
Jacobs is a global engineering company, and leading project delivery firm providing engineers, scientists, planners, economists, architects, project managers and logisticians.
Jacobs is committed to the provision of quality risk and safety management services, dangerous goods consulting and other services including:
Find out more about the extensive range of engineering services available at Jacobs.
Senior Risk Management Consultant
Level 7, 32 Cordelia Street
South Brisbane QLD 4101
PO Box 3848
South Brisbane Qld 4101
Phone: 61 (0)7 3026 7506
Mobile: (0)427 602 141
Risk Manager APAC Industrial – Western
263 Adelaide Terrace, Perth
Phone: 61 (0)8 9469 5016 direct
Mobile: 61 (0)447 960 628 mobile
Leighton O'Brien is a global market leader in comprehensive wetstock management and petroleum storage integrity services. We specialise in tank and line testing, tank cleaning and fuel restoration, and wetstock management. Our expertise enables customers to achieve the tightest storage systems, the lowest fuel losses, the most accurate wetstock management, the highest compliance, the cleanest fuel and fewer meter calibration checks, overlaid on the best reporting platform available. Leighton O'Brien has grown to 43 service distributors globally operating in 19 countries.
Leighton O'Brien is the second largest SIRA Company in the world with 24,000 tanks under monitoring here and internationally; we are the number 1 tank testing company in New Zealand, Malaysia, Thailand, Philippines, and HK. We have a growing operation in the USA based in Texas.
Our tank integrity testing services are used by all major oil companies and a wide variety of commercial clients. The reason for integrity testing by these clients are many and varied and can include suspect product loss, water ingress, due diligence, site divestment, financial institution requirement etc. Our technology is USEPA certified and is used throughout Asia, the Americas and Europe.
A fuel leak is a considerable risk that may lead to serious environmental or health risks, which may lead to EPA fines or a costly court case.
Our tank cleaning services have had much success working with major oil and commercial companies in helping to solve operational problems such as false ATG/dip readings, slow flow caused by blocked pump filters, rust particulate problems, E10 phase separation, sludge issues on the bottom of tanks and to ensure efficient operation of generators. All works are performed with product in the tank (ideally around the 50% fill level) and can be scheduled to minimise disruption.
3rd Floor, 20 Council Street
Hawthorn East Vic 3123
Phone: (03) 9804 2200
Fax: (03) 9804 2299
Mobile: 0402 043 804
Lloyd's Register Drilling Integrity Services Australia Pty Ltd
Lloyd's Register Energy – Drilling provides our clients with enhanced equipment availability, reliability and maintainability along with better asset integrity. This gives you an immediate result in improved safety, efficiency and competitiveness of your drilling operations in any environment, both on and offshore. We are experienced in management system development and understand the importance of sustainable systems in the context of improving the safety, productivity and efficiency of the business process within an organisation. Our drilling services combine 50 years of combined ModuSpec and WEST Engineering experience, with 250 years of experience from Lloyd's Register, creating an exceptional and unique service offering to the drilling industry.
Mendham Consultants Pty Ltd
Mendham Consultants are leaders in the delivery of industrial fire and risk engineering solutions across hazardous and chemical industries. Mendham Consultants specialise in dangerous goods. For facilities storing, handling and processing hazardous, toxic, flammable and reactive chemicals, the development of a safe work environment, protecting occupants and critical infrastructure is paramount to an organisation’s operations. Through competent professional fire, risk and process engineering (RPEQ) Mendham Consultants assists its clients to ensure all aspects of a facility’s design, its work practices and emergency preparedness are compliant and appropriate to protect occupants and critical infrastructure.
Microrisk® is an independent Queensland based risk management company with a chartered chemist and registered environmental OH&S auditor specialising in hazardous substances / dangerous goods.
Mr Charles Silcock
Mobile: 0419 515 369
MOXI / Skill + Learning
MOXI provides training, competency mapping and competency assessment to the oil and gas, mining, mineral processing and infrastructure industries – worldwide. MOXI training falls into the following categories: Electrical Equipment for Hazardous Areas (EEHA) courses; Technical Risk Management courses; E-learning courses. MOXI / SKILL + LEARNING
Mr Sam Zacha
Phone: (08) 9479 3841
Mobile: 0400 011 023
Fax: (08) 9479 4677
Phone: 1300 668 992
Address: 1/13 Brennan Way, Belmont WA 6104
Postal address: PO Box 696, Belmont WA 6984
National Safety Council of Australia Ltd (NSCA)
NSCA can provide training, consulting, auditing and advisory services to assist organisations to comply with legislation .
Neodyme Australia Pty Ltd
Our Brisbane based team or experts provides fully tailored services in Work Health and Safety, Environmental Protection and Process Safety. We deliver a wide ranges of services designed to support your activity - assessing your risks / impacts, managing your compliance and implementing effective solutions with the aim of becoming your one stop shop.
With more than 10 years of experience, we helped many industries with safe and long lasting management of their chemicals and related risks. We think global and bring valuable expertise to make your workplace safer and maintain the operability of your plants.
Neodyme Australia Pty Ltd
Yoann SECRET – General Manager
370, Queen Street – Level 3
Brisbane QLD 4000
Tel: 0450 094 947
Noel Arnold and Associates Pty Ltd
Noel Arnold and Associates (NAA) is part of Greencap Consulting Group, a formidable consulting network that provides our clients with a comprehensive range of risk services. Our network includes around 400 staff throughout Australia and South East Asia. NAA offers a complete range of professional and proven risk management services to help improve the health and safety performance and efficiency of your organisation.
Parsons Brinckerhoff (PB) has a team of specialists who offer a comprehensive range of services relevant to dangerous goods and hazardous materials storage and handling.
Peta Lywood Dangerous Goods Consulting
Consulting in the area of dangerous goods and hazardous substances.
Ms Peta Lywood
Mobile: 0410 860 870
Plastics and Chemical Industries Association (PACIA)
PACIA conduct a range of courses on the management of hazardous substances and dangerous goods.
R4Risk is an independent consulting firm providing services in the fields of risk management and process safety to companies across a broad range of industries.
R4Risk's mission is to assist its clients to manage their risks effectively, efficiently and sustainably, through technically superior risk management. We have extensive and varied experience in industry and risk consulting, and are able to tailor our services to find the best solution for your risk management needs.
RG Chemical Safety
RG Chemical Safety provides training and consultancy services in Hazardous Chemicals, WHS, GHS and Dangerous Goods Transport Classification and Compliance. Richard Greenwood was selected by Safe Work Australia to present training for them in GHS Classification in 2013 and 2014.
RKEJ Pty Ltd
The organisation provides consulting services to assist organisations to comply with legislation.
Safety Resource Centre
Phone: 1800 00 SAFE (or 1800 00 7233)
Sherpa Consulting is an independent and highly skilled team of safety and risk engineers, based in Australia, with extensive industry experience in onshore and offshore oil and gas, chemical handling and processing, and critical infrastructure projects in South East Asia and Australia. Sherpa has been providing an extended range of services to its clients since 2004.
Mr Stuart Chia, Director
Phone: (02) 9412 4555
Simtars provides consultancy-based services in dangerous goods and hazardous substances. These services include:
- Auditing of dangerous goods safety management
- Exposure assessments
- Hazard and risk analysis
- Training in hazardous substances and dangerous goods management
- Environmental assessment and impact
- Development of safety management systems, emergency plans, manifests
- Design and development of risk mitigation strategies.
Phone: (07) 3810 6333
TfA Project Group
TfA are consulting engineers who specialise in the design of flammable and combustible liquids storage and distribution facilities. We work extensively for all major oil companies and clients within the mining industry and defence force. We have designed service stations, truck stops, oil terminals and blending plants, fuel depots, timber treatment facilities, mining refuelling and workshop lubrication facilities and aviation hydrant system refuelling facilities.
Mr Keith Sharp
Phone: (07) 3854 2924
Fax: (07) 3854 2999
- Last updated
- 07 August 2020