A tunnel is any excavation that is approximately horizontal and starts at the surface or from within another excavation. Tunnelling work is often highly complex and involves the use of a range of engineering and construction techniques, plant and equipment.
There are a number of risks with tunnelling work, including the risk of collapse, contaminated atmospheres (toxic, flammable, etc.), and risks associated with heavy plant or equipment.
There are often a range of activities taking place inside a tunnel that are not directly associated with the boring or tunnelling component. These include building support and other internal structures, installing services, and constructing the surface. Workers carrying out these activities are exposed to a number of additional risks that must be managed, including:
- noise, which can be amplified in an enclosed space
- heat stress
- air quality
- the movement of vehicles and mobile plant in an enclosed space.
In addition, issues that might usually be straight forward to manage (e.g. pedestrian routes, facilities and amenities) are complicated by the enclosed and limited space in a tunnel construction environment.
The Guide for tunnelling work provides guidance on managing the risks associated with tunnelling work.
Excavation work is considered construction work under the Work Health and Safety Regulation 2011 and must be carried out in accordance with the relevant regulations
WHS Regulation 2011, Chapter 6 – Construction Work
Safe work method statements
Safe work method statements are required for all high risk construction work, including any construction work that is carried out in or near a tunnel
WHS Regulation 2011, s291 and s299
The following are defined as dangerous incidents and must be notified to Workplace Health and Safety Queensland:
View additional information about the notification of dangerous incidents, including the notification form
Work Health and Safety Act 2011, s35, s36, s37, s38 and s39
- Last updated
- 06 June 2017
Concrete pumping Code of Practice 2019
This replaces the Concrete pumping Code of Practice 2005.