Tilt-up and pre-cast construction
Tilt-up and pre-cast construction includes
- casting of panels
- panel lifting
- rigging systems
- propping and securing panels.
This type of work is becoming a more common form of construction. Workers involved in these activities are exposed to a number of significant risks, including:
- the risk of a fall from height
- the risk of falling objects, such as concrete panels
- risks associated with mobile plant (e.g. cranes and elevating work platforms), including being struck or crushed.
The Tilt-up and Pre-cast Construction Code of Practice 2003 (PDF, 654.84 KB) provides guidance on managing the associated risks.
Excavation work is considered construction work under the Work Health and Safety Regulation 2011 (PDF, 2.53 MB) and must be carried out in accordance with the relevant regulations
Chapter 6 – Construction Work, WHS Regulation 2011
Safe work method statements
Safe work method statements are required for all high risk construction work, including any construction work that involves tilt-up or pre-cast concrete
WHS Regulation 2011, s291 and s299
The fall or release from a height of any plant, substance or thing, including tilt-up or pre-cast panels, is a dangerous incident and must be notified to Workplace Health and Safety Queensland
View additional information about the notification of dangerous incidents, including the notification form
Work Health and Safety Act 2011 (PDF, 833 KB), s35, s36, s37, s38 and s39
- Last updated
- 09 September 2016
Look Up and Live
Supervisors and workers should assess the risks of working near overhead powerlines or underground electric lines before work commences.